Welcome to Project52 Ltd.co.uk - Storage & Material Handling Solutions

1.	Solo Frame: Solid, single skin, cost effective frame, featuring a delta profile front post with a T-section rear for easy and immediate fitting of cross bracing and cladding.
2.	Mono Frame: Open, clear entry frame for heavier duty applications and where ventilation is required.
3.	Duo Frame: Solid, double skinned box section frame, clear entry frame. Also allows clear access to the full shelf width. Conforms to BS5454 clear access requirements.
	Cross Brace: Provides stability bracing for open back shelving. Used where rear cladding is not specified.
	Rear Cladding: Solid interlocking steel sheets that enclose the rear of the bay. Also gives essential stability to the bay structure as an alternative to cross-bracing.
	Mesh Cladding: Can be fitted to open frames and as rear cladding for all frame types. Retains visibility and ventilation for the items stored.
	Dual Use Shelf: 25mm section shelf with a formed open flange. Also carries suspension filing underneath the shelf at appropriate depths. Fits all above frames plus the Euro shelving frame.
	Box Section Shelf: 25mm welded box section on the front and back edges for greater load bearing capacity. Fits all above frames plus the Euro shelving frame.
	Under-Shelf Divider: Divider simply clips in under the shelf to hold books, files etc upright. For use with Dual Use shelves only. Can be re-positioned as required.
	Vertical Divider: Used to divide shelves horizontally into smaller storage compartments. Reinforced leading edge provides extra strength. Easily repositioned.
	Document Divider: Slim profile divider ideal for paper and record storage. Ensures maximum use of shelf capacity. Easily relocated on shelf.
	Part Height Dividers: 150mm high divider which slots either on top or below the shelf to provide storage compartments or support for files and similar tall material.
	Pull-out Reference Shelf: Provides a flat and stable work surface for document or file reference within the aisle.
	Pull-out Drawer: Ideal for the storage of CDs, electronic media and other small items within a shelving bay. Available in 3 heights.
	Pull-out Filing Cradle: can accommodate A4 and foolscap top loaded suspension files.
	Back Stop: Zinc plated rod fits across the rear of bays to prevent files falling off the back of a shelf or segregate back to back shelves.
	Frame Floor Clip: Simple clip-in bracket which allows all types of Stormor frames to be floor fixed; can be shimmed; fits within bay footprint.
	Floor Plinth: Prevents dust and debris collecting under the shelving. Simply clips to the underside of shelf.
	Half Height Door Kit: Hinged 1100mm high door. Creates secure storage cupboard within shelving. Doors are stiffened to the full height to create a smooth overall finish of the front face.
	Full Height Door Kit: Hinged doors transform shelving into a secure storage cupboard. Doors feature full height vertical stiffener, 2-point locking, recessed handle & safety key.
	Tambour Door Kit: Roller shutter doors for security and dust protection of items stored. When open, door does not protrude into aisle making this an ideal solution for secure storage where aisles are narrow.
	Plastic Drawers: Ideal for the storage of small items. Available in 3 sizes, the drawers tilt on integrated back-stops to allow easy viewing and access. Can also be sub-divided internally using dividers.
	Bin Fronts: When fitted these prevent items falling off the front of shelves. Can also be used with shelf dividers to form enclosed compartments or 'bins'. May be used as heavier duty back-stop.
	Clip-in Garment Hanging: System of rails and brackets which fit within bay widths to allow the hanging of garments. Rails can be re-positioned as required to create double hanging space.

Prices quoted are inclusive of delivery to UK mainland addresses only (excepting remote parts of Scotland), but are exclusive of VAT rate applicable at the time of invoice. Orders of £100 or less in value will incur a £35 carriage charge.

Delivery for all standard items normally 5 to 8 days FRO

Please contact our office for more information, design support and competitive pricing.

The information contained in this price list was accepted as correct at the time of publication. However, Project 52 Ltd reserves the right to make any necessary changes, in line with product development and trading conditions. Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions.
E+OE. SUBJECT TO PROJECT 52’s STANDARD TERMS & CONDITIONS OF SALE as provided.

Longspan Heavy Duty Shelving System

Longspan shelving offers wide, unrestricted shelf levels ideal for the storage of heavy, large and awkwardly shaped items.

The simple frame and beam system is easy to assemble and may be adjusted to meet changing needs.

With a choice of chip board, flat or profiled galvanised steel shelves and optional lateral dividers, makes this range is suitable for any environment.

A multi-tier system with elevated aisles can be designed to make full utilisation of warehouse head room.

Shelf and Frame Size

18 open* frame heights 1200 to 4050mm in 150mm increments
6 shelf depths 450 to 1200mm
14 shelf widths 1050 to 3000mm
Frame loads up to 6800kg** max
Shelf load capacity range 200 to 1800kg** UDL

     *also available as steel or mesh clad options
     **dependant on bay dimensions & component selection

     Components and Accessories

Select A Number to Enlarge:
1. Galvanised Steel Shelf Panels
2. Galvanised Steel Profile Panels
3. Chipboard Shelving
4. Boxed Beam
5. Steel Cladding
6. Cladding Location Bracket
7. Shelf Cladding Support Boxed Beam
8. Shelf Cladding Support Stepped Beam
9. Beam Tie
10. Stepped Beam
11. Lateral Dividers
12. Foot Plate
13. Mesh Panels
14. Frame
15. Frame Joining Strap - (back-to-back)
16. Vertical Frame Joining Unit
17. Show All

Multi-tier Euro Shelving System

Euro shelving is a medium to heavy duty, modular steel shelving system.
Frame upright in various duty factors, make it possible to create a multi-tier system with elevated aisles, landings and staircases to fully utilise warehouse head room.
A range of shelves and storage accessories enable a high degree of adaptability to match diverse storage needs in one system.
Adjustable shelf pitch, achieves minimal wastage of linear space and optimise use of the storage area in the commercial environment.
Fully compatible with all our space saving mobile storage systems.

Bay Assembly

From a single starter bay, extension bays can be easily and quickly added to create runs of single or double sided back to back shelving. The uniquely designed shelf support clips create a rigid structure and help avoid accidental dislodgement of shelves.

Shelf and Frame Size

30 clad* frame heights 1200 to 15300mm
7 shelf depth 300 to 900mm
3 steel shelf widths 600 to 1250mm
3 chip board (18mm) widths 1200, 1500 and 1800mm
Frame loads up to 5550kg** max
Shelf load capacity range 115 to 350kg** UDL

*also available as perforated clad and open options
**dependant on bay dimensions & component selection

Components and Accessories

A wide range of interchangeable accessories can be easily added to the shelving system to enable different items to be accommodated in the same unit, providing a versatile and customised storage facility, increasing efficiency and accessibility.

Select A Number to Enlarge:
1. Shelf dividers
2. Shelf Bin fronts and fillets
3. Full width draws (optional dividers)
4. Part shelf support brackets
5. Garment hanging
6. Door kits
7. Lateral filing frames
8. Plastic draw units
9. Floor trim
10. Timber shelving
12. Louver panel kits
13. Show All

Chrome Wire

This high quality Chrome Wire shelving system is a tried and tested product, lending itself to endless and imaginative applications in all commercial areas, where strength, style and elegance are required.

Superior strength to weight ratio with extended load capacity
Good product display visibility and air circulation (NSF acceptable)
Shelf heights adjust in 25mm increments
Minimised moisture and dust accumulation
Easy and fast assembly
Mobile versions

Assembly

Snap the collar into any groove on the post and it locks into position.
Slide the chosen shelf design or accessory over the post until it rests over the plastic collar.
Complete the operation by tapping the shelf or accessory corners down with a soft faced rubber mallet.

Posts are grooved at 25mm intervals and double grooved every 200mm for easier shelf alignment.

Chrome Components and Accessories

Select A Number to Enlarge:
1. Post
2. Shelf
3. Shelf Panel
4. Shelf Ledge (all edges)
5. Shelf Divider
6. Back Grid
7. Half Moon Cantilever Shelf
8. Cantilever Shelf
9. Garment Rail
10. Utility Rail
11. Long Cart Handle vertical mount
12. Basket
13. Post Clamp
14. Euro Hook
15. Single Prong Hook
16. Corner Triangular Shelf
17. Wine Shelf
18. Sloping Shelf
19. Castor (standard & conductive)
20. Adjustable foot (supplied as standard)
21. Base plate
22. Add on clip
23. Short Cart Handle - Horizontal mount (not shown)
24. Show All

Cold Store and High Humidity Applications

Wire Shelving is also available in a proven, rust resistant ‘Permaseal’ finish. This standard product is specifically designed for use in cold store or high humidity applications and has a 15 year guarantee against corrosion. A stainless steel version is also available on request.

Chrome Wire Shelving Units - Height 1625mm (64 inch)

Ready to assemble flat packed bays with 4 shelves and leveling feet.

Bay Size W x L		Shelf Load	Bay	Extra Shelf
mm	inch	kg UDL	Part No	Part No

305 x 760	12 x 30	360	EC32	EC1230
305 x 915	12 x 36	360	EC37	EC1236
305 x 1070	12 x 42	360	EC34	EC1242
305 x 1220	12 x 48	360	EC38	EC1248

355 x 760	14 x 30	360	EC35	EC1430
355 x 915	14 x 36	360	EC36	EC1436
355 x 1070	14 x 42	360	EC33	EC1442
355 x 1220	14 x 48	360	EC30	EC1448

460 x 460	18 x 18	360	EC39	EC1818
460 x 610	18 x 24	360	EC40	EC1824
460 x 760	18 x 30	360	EC43	EC1830
460 x 915	18 x 36	360	EC44	EC1836
460 x 1070	18 x 42	360	EC51	EC1842
460 x 1220	18 x 48	360	EC45	EC1848
460 x 1370	18 x 54	300	EC53	EC1854
460 x 1520	18 x 60	300	EC46	EC1860
460 x 1820	18 x 72	280	EC52	EC1872

610 x 610	24 x 24	360	EC47A	EC2424
610 x 760	24 x 30	360	EC47	EC2430
610 x 915	24 x 36	360	EC48	EC2436
610 x 1070	24 x 42	360	EC54	EC2442
610 x 1220	24 x 48	360	EC49	EC2448
610 x 1370	24 x 54	300	EC56	EC2454
610 x 1520	24 x 60	300	EC50	EC2460
610 x 1820	24 x 72	280	EC55	EC2472

Chrome Wire Accessories

Carriage Free for total order values > £460.00 excluding vat (see sales conditions below)

For more details of our comprehensive range of accessories avaliable contact our sales office

For volume enquiries please contact our sales office.

Prices quoted are inclusive of delivery to UK commercial mainland addresses only (excepting remote parts of Scotland), but are exclusive of VAT rate applicable at the time of invoice. Orders of £460 or less in value will incur a 10% carriage charge.

Delivery is normally 3 to 5 working days from receipt of order.

The information contained in this price list was accepted as correct at the time of publication. However, Project 52 Ltd reserves the right to make any necessary changes, in line with product development and trading conditions. Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions.
E+OE. SUBJECT TO PROJECT 52’s STANDARD TERMS & CONDITIONS OF SALE as provided.

Stainless Steel Shelving

This modular, high quality stainless steel shelving system has been specifically developed for clean room, hygienic and sterile applications, where dependability is key.

Manufactured by Caddie ® in 18/20 grade stainless steel, the basic components consist of ladder uprights joined with square tube cross members, adjustable height, removable shelves or telescopic frames, combined to form custom bays to meet discerning needs.

Superior strength to weight ratio with extended load capacity
Resistant to corrosion and the most aggressive disinfectants
Wash down and Autoclave resistant (+134 deg C with Delrin castors fitted)
Removable and adjustable height shelves in 125mm increments
Configurable in continuous bay runs and right angle extensions
Air circulation (NSF acceptable)
Accommodates standard range of hygienic containers and baskets
Fast assembly and easily reconfigurable
Compatible mobile cart versions

Nominal Dimensions

Upright Heights : 955mm, 1705mm and 2205mm

Shelf Lengths: 700mm, 1000mm and 1300mm

Shelf Widths: 500mm and 600mm (510 and 610mm overall)

Wheeled Upright Heights : 1115mm and 1855mm (2205mm not available with castors)

Wire Shelf

Solid Steel Shelf

Steel Frame Shelf

Cross Member (Reinforcement Bar)

Bay Assemblies in Kit Form

This shelving system is available as stand alone bays, bay extensions and right angel extension kits for ease of ordering. A comprehensive range of component accessories is also available to enable you to create custom storage or trolley systems to meet your special needs.

For more information on the full range of stainless steel shelving please contact our sales office.

Heavy Duty Budget Shelving

It's So Quick and Easy!

Simple tap-together construction

No fiddly nuts & bolts

Bays assembled within 10 minutes!

Unpack and assemble framework by simply tapping together...

...with framework complete, just drop shelves into position. Simple.

Strong and robust, adjustable heavy duty shelving for manufacturing, engineering and production environments. Simple and fast assembly, providing you quick solutions to your storage needs. Bays can tailored to your needs by adding shelf levels. Bays comprise 4 uprights, 3 shelf levels with 18mm chipboard on channel beams, beam ties, feet and assembly instructions. Uprights are available in a choice of standard colours complimented by light grey beams.

Dark Grey GX

Blue GB

Red RD

HEAVY DUTY BAYS 1980mm HIGH
3 SHELF LEVELS with 18mm Chipboard Shelves

Width x Depth	Shelf Load kg UDL	£ Each	Extra Shelf £ Each
1500 X 450	580	£CALL	£CALL
1500 X 600	310	£CALL	£CALL
1500 X 900	135	£CALL	£CALL
1800 X 450	675	£CALL	£CALL
1800 X 600	440	£CALL	£CALL
1800 X 900	210	£CALL	£CALL
2100 X 450	650	£CALL	£CALL
2100 X 600	460	£CALL	£CALL
2100 X 900	245	£CALL	£CALL
2400 X 450	600	£CALL	£CALL
2400 X 600	525	£CALL	£CALL
2400 X 900	250	£CALL	£CALL

For volume enquiries please contact our sales office.

The information contained in this price list was accepted as correct at the time of publication. However, Project 52 Ltd reserves the right to make any necessary changes, in line with product development and trading conditions. Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions.
E+OE. SUBJECT TO PROJECT 52’s STANDARD TERMS & CONDITIONS OF SALE as provided.

Standard Duty Budget Shelving

Simple, tap together, fully adjustable shelving for general purpose and economic storage solutions. Bays can be tailored to your needs by adding shelf levels. Bays comprise 4 uprights, 5 shelf levels with 18mm chipboard on J beams, feet and assembly instructions. Uprights are available in a choice of standard colours complimented by light grey beams.

Dark Grey GX

Blue GB

Red RD

STANDARD DUTY BAYS 1980mm HIGH
5 SHELF LEVELS with 18mm Chipboard Shelves

Width x Depth	Shelf Load kg UDL	£ Each	Extra Shelf £ Each
900 X 300	375	£CALL	£CALL
900 X 450	355	£CALL	£CALL
900 X 600	200	£CALL	£CALL
1200 X 300	350	£CALL	£CALL
1200 X 450	350	£CALL	£CALL
1200 X 600	240	£CALL	£CALL
1500 X 300	260	£CALL	£CALL
1500 X 450	260	£CALL	£CALL
1500 X 600	260	£CALL	£CALL

For volume enquiries please contact our sales office.

The information contained in this price list was accepted as correct at the time of publication. However, Project 52 Ltd reserves the right to make any necessary changes, in line with product development and trading conditions. Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions. E+OE.
SUBJECT TO PROJECT 52’s STANDARD TERMS & CONDITIONS OF SALE as provided.

Budget Archive Shelving

* Box not to scale

This archive system offers a cost effective solution to high density, bulk document storage. These easy to assemble units are supplied complete with archive storage boxes and are available in 4 different profiles to meet the majority of requirements. Bays comprise 4 uprights, 3 shelf levels with 18mm chipboard on channel beams, beam ties, feet and assembly instructions.

ARCHIVING BAYS
3 SHELF LEVELS with 18mm Chipboard Shelves

Profile	*H xD x W mm**	£ Each
30 Box unit	2050 X 450 X 1800	£CALL
35 Box unit	2270 X 450 X 1800	£CALL
60 Box unit	2050 X 900 X 1800	£CALL
70 Box unit	2270 X 900 X 1800	£CALL

* Overall height to top of highest box
Internal dimension of storage box 254H x 330W x 407Dmm

For volume enquiries please contact our sales office.

The information contained in this price list was accepted as correct at the time of publication. However, Project 52 Ltd reserves the right to make any necessary changes, in line with product development and trading conditions. Although all reasonable care has been taken to make it as complete and accurate as possible, no liability can be accepted for any inaccuracies or omissions. E+OE.
SUBJECT TO PROJECT 52’s STANDARD TERMS & CONDITIONS OF SALE as provided.

Display Shelving System

This all steel, modular shelving system is designed for display purposes, providing a high degree of adaptability to match changing resale needs.

The standard configurations are either wall bays or central ‘gondola’ units with ‘hot spot’ bays located at the ends of ‘gondola’ runs, usually used for focus promotions.

Gondola Bay

Hot Spot Bay

Wall Bay

Standard System Dimensions

Wall upright heights range 1110 to 3000mm with 1400 and 2200mm most popular.
Gondola heights are 1200, 1400 and 1600mm with 1400mm most popular.
Bay widths are 665, 1000, 1250mm, plus corner bays.
Shelf depths are 770, 570, 470, 370, 300 and 200mm
Shelves available as standard or heavy duty
Back panels include, Plain for use with shelves, Perforated for use with hooks and Slatted for use with a mix of hooks and accessories.
Chrome and plastic shelf divider system, hooks, garment rails and special bar stocks.

Please contact our sales office for design support and competitive pricing

Adjustable Shelving Terminology

A system of uprights connected by horizontal shelves, the positions of which can be adjusted vertically.

1. BAY - Module between a pair of frames.
2. RUN - A series of shelving bays connected length-ways.
3. SINGLE SIDED RUN - A Single depth of shelving.
4. DOUBLE SIDED RUN - Two runs built back to back, not necessarily of the same depth, but sharing a common 'spine'.
5. LEVELS - The number of storage levels in the shelving height.
6. AISLE -Space giving access to the picking or loading faces of shelving.
7. GANGWAY -Space for movement of transport but not giving access to picking or loading faces.

Berkshire; Newbury, Reading, Bracknell, Maidenhead, Slough, Haynes, Buckinghamshire; High Wycombe, Glouscestershire; Glouscester, Northamptonshire; Northampton, Oxfordshire; Oxford, Banbury, Wallingford, Abingdon, Didcot, Faringdon, Wantage, Wiltshire; Swindon.